Update Trail Option; Update Trail Criteria (Auto, Time, Distance) - Lowrance iFINDER H2O Operation Instructions Manual

Update Trail Option

This menu lets you change the way the trail updates occur.
WARNING:
If you uncheck the Update Trail option, automatic trail creation and
recording will be turned off in both Advanced and Easy modes, and
you must turn it back on to record trails. The default setting is on.
Press ↓ or ↑ to
check it (turn on) and uncheck it (turn off.)

Update Trail Criteria (Auto, Time, Distance)

The options are automatic, time, or distance. When it's in the default
automatic mode, the unit doesn't update the plot trail while you're
traveling in a straight line. Once you deviate from a straight line, the
unit "drops" a plot point (trail waypoint) onto the trail. This conserves
plot trail points. If a plot trail uses all of the available points allotted to
it, the beginning points are taken away and placed at the end of the trail.
Press ↓ to
U
PDATE
Trail Options menu.
. With the option highlighted, press
U T
PDATE RAILS
Trail Options menu.
|
C ENT
RITERIA
|press ↓ or ↑ to select criteria type|
87
to
ENT
.
ENT