Configure Nmea - Lowrance iFINDER H2O Operation Instructions Manual

For connectors and wiring information for another device, consult the
factory; phone numbers are in the back of this manual. To set Com Port
Configuration:
1. Press
MENU
2. Press ↓ to
C

Configure NMEA

You can configure the unit to use specific NMEA sentences.
1. Press
MENU
2. Press ↓ to
C
3. A menu appears showing the prefixes of the available NMEA sen-
tences. A check mark next to a prefix means the prefix is in use. Use ↑
↓ → ← to select a prefix, then press
again to check the box and turn a prefix on.)
ENT
Configure NMEA menu, showing all prefixes turned on (checked).
NOTE:
The names of the NMEA sentences are abbreviated in this menu.
These are the functions of the various selectable prefixes:
• GLL transmits latitude and longitude of present position, time of
position fix, and status.
• RMC and RMB transmits navigation information messages.
• APB transmits autopilot information.
• GGA transmits time, position, and fix related data.
• GSA and GSV transmits fix mode, DOP values, and satellites in
view information.
4. When the desired prefixes are checked or unchecked, press
| |
EXIT EXIT EXIT
| |↓ to
MENU S
| .
P ENT
OM ORT
| |↓ to
MENU S
| |↓ to
P ENT
OM ORT
| to return to the previous page.
EXIT
|
S ENT
YSTEM ETUP
|
S ENT
YSTEM ETUP
C
ONFIGURE
ENT
64
.
.
| .
NMEA ENT
to turn off the prefix. (Press