Map Detail Category Selection - Lowrance iFINDER H2O Operation Instructions Manual

ated using different datums will show the same latitude/longitude in
slightly different locations.
All datums are named. The GPS system is based on the WGS-84 da-
tum, which covers the entire world. Other datums may also cover the
entire world, or just a small portion of it. By default, your position
shows using the WGS-84 datum. However, it can show your position
using one of 191 different datums.
Different datums can be selected only in Advanced Mode. (Switch from
Easy to Advanced:
the datum:
1. Press
MENU
2. Scroll ↓ or ↑ to select the desired datum, then press
3. To return to the last page displayed, press
A list of the datums used by this unit is in the back of this manual.
GPS Setup Menu, left, Map Datum Menu, right.

Map Detail Category Selection

This menu determines which of the mapping features are shown on the
screen. This includes, waypoints, trails, icons, cities, highways, etc. You
can selectively turn on or off any of these items, customizing the map to
your needs. Map Detail Categories can be turned off and on only in Ad-
vanced Mode. (Switch from Easy to Advanced:
| |←|
M ENT
ODE
To get to Map Categories:
1. Press
MENU
2. Press ↑ or ↓ to select a category or subcategory. Press
off (no check) or on (checked).
3. To return to the last page displayed, press
|↓ to
MENU
| |↓ to
MENU GPS S
.)
ENT
|↓ to
M C
AP ATEGORIES
A M
DVANCED ODE
| |↓ to
ENT
ETUP
| .
ENT
72
| |←|
ENT ENT
D S
ATUM ELECTION
.
ENT
| .
EXIT EXIT
|↓ to
MENU
ENT
| .
EXIT EXIT
.) To change
| .
ENT
A
DVANCED
to turn it