Playing Music From The Aux Input - Denon HEOS 1 Owner's Manual

Contents

Playing music from the AUX input

1
Connect an audio device with a 3.5 mm stereo audio
output to the AUX input on your speaker using the
included 3.5 mm stereo audio cable.
2
Select "AUX Input" from the Music tab.
3
Select the name of the speaker to which you connected
the audio device in step 1.
4
Initiate playback on the audio device.
5
The sound from the audio device can be played directly
on the selected speaker or digitized and sent over your
network to other speakers.
NOTE
The analog output signals from some sources can be fairly strong. If the input level of
the source device is turned up high, it could overload the inputs of the HEOS device.
This is unlikely to cause damage, but can cause distorted sound. Initially, set the
volume of the source to a medium – low level, then turn it up as needed. If you hear
distortion, turn down the device's volume control.
Setup Use Troubleshooting
Audio signal
21
Status LED Appendix