Navigating With Obs Hold - Lowrance AirMap 600c Operation Instructions Manual

TO arrow
Fig. 1
Following a course by "chasing the needle." Fig. 1, plane has veered off
course to the right by nearly 3 nautical miles, away from the needle.
Fig. 2, pilot turns on heading of 348º, steering left toward CDI needle to
intersect intended course. Fig. 3, pilot has intercepted his route and is
The most important graphic element, however, is the CDI needle. The
CDI and the cross track error scale instantly show you the distance to
the course line, as well as the direction to steer to get back on course.
In the example above, fig. 1 shows the pilot off course to the right, so
the CDI needle appears to the left of the plane symbol. Fig. 3 shows the
pilot back on course, so the CDI needle appears to line up with the
course arrow. If you steer toward the CDI needle line, you'll always be
heading in the correct direction to get back on course.
NOTE:
The examples above all show navigation to a waypoint, the most
common method of GPS navigation. To show navigation from a way-
point, see the instructions on the OBS Hold feature later in this sec-
tion.

Navigating with OBS Hold

AirMap contains an OBS Hold feature to help you navigate along a pilot-
selected radial to or from a location. You must first turn on navigation to a
location before you can access OBS Hold. While running a route or navi-
gating to a waypoint, you launch OBS Hold from the Navigation Page;
just press the right or left arrow to initiate it.
Course arrow
Fig. 2
virtually on course.
CDI needle
29
Fig. 3