Sec. 6: Searching; Aviation Mode Searches; Find An Airspace (Using Cursor) - Lowrance AirMap 1000 Operation Instructions Manual

Aviation mapping gps receiver
Table of Contents

Advertisement

Whether you are in Aviation Mode or Land Mode, AirMap's search func-
tions all begin with the
each mode. However, the Aviation Mode searches appear only in Aviation
Mode (while the general searches appear in both Aviation and Land mode).
Aviation Mode Find menu, left; Land Mode Find menu, right.
NOTE:
You can search for items even if AirMap hasn't acquired a position
yet, or start from a position other than your own. When you do a
search, distance and bearing to the selected item will be calculated
from AirMap's current position. If AirMap hasn't acquired a posi-
tion, it will use the last known position. If the cursor is active, Air-
Map will always begin the search at the cursor. You can look up
items by name, or search for the item nearest to you.

Aviation Mode Searches

Find An Airspace (Using Cursor)

On the Map Page, you can select airspaces with the cursor by scrolling
over the airspace border. When the airspace is selected, the line defin-
ing its border will expand. Press
will appear showing you details about the selected airspace. To return
to the previous page, press
NOTE:
The position, distance, and bearing information shown on the way-
point information screen are based on the cursor position within the
airspace, not on the airspace itself. This means you can scroll the
Section 6: Searching
key, and the search menus work the same in
FIND
EXIT
|
FIND
ENT
.
109
and an Information Page

Advertisement

Table of Contents
loading

Table of Contents