Breville Duo-Temp Pro BES810 series Instruction Booklet page 27

TROUBLEShOOTING PAge heAder.....
PROBLEM
Coffee does not run
through
Coffee runs out too
quickly
Coffee is too cold
BES810BSS_ANZ_IB_E14.indd 27
POSSIBLE CAUSES
• Machine is not turned
On
• Water tank is empty
• The Control Dial not in
'Espresso' position
• Coffee grind is too fine
• Too much coffee in the
filter basket
• Coffee tamped too
firmly
• The filter is blocked
• The coffee grind is too
coarse
• Not enough coffee in
the filter
• Coffee not tamped
firmly enough
• Cups not preheated
WhAT TO dO
Ensure the machine is
plugged in, switched On
at the power outlet and the
POWER button is pressed.
Refer to 'Filling The Water
Tank', page 14.
Turn the Control Dial to
the 'Espresso' position
Ensure you use a suitable
espresso grind. Refer to
'The Grind', page 18.
Refer to 'Coffee Dose and
Tamping', page 18.
Refer to 'Coffee Dose and
Tamping', page 18.
Use a pin to clear the holes.
Please refer to 'Cleaning
Filter', page 25.
Ensure you use a suitable
espresso grind. Refer to
'The Grind', page 18.
Refer to 'Coffee Dose and
Tamping', page 18.
Refer to 'Coffee Dose and
Tamping', page 18.
Preheat cups. Refer to
'Pre-heating Cup or Glass',
page 18.
When the base of the jug
becomes too hot to touch
this is when milk is heated
at the correct temperature.
Refer to 'Texturing Milk',
page 20.
27/06/2014 5:26 pm
27