Breville Duo-Temp Pro BES810 series Instruction Booklet page 25

PAge heAder..... CARE & CLEANING
CLEANING ThE STEAM WANd
1
Run steam to clear milk
from wand after texturing
CLEANING FILTER BASKETS
Should the fine holes in the filters become
blocked follow the steps below:
Place the filter into the portafilter.
1.
Run water through the machine with
the filter and portafilter, without any
ground coffee, in place.
A pin can be used to clear the filter
2.
basket holes.
For a thorough clean of the filters,
3.
dissolve a cleaning tablet in hot
water and soak filters overnight.
CLEANING ThE OUTER hOUSING /
CUP WARMING PLATE
The outer housing and cup warming plate
can be cleaned with a soft, damp cloth. Then
polish with a soft, dry cloth.
Do not use abrasive cleansers, pads or cloths
which can scratch the surface.
CLEANING ThE dRIP TRAy
The drip tray should be removed, emptied
and cleaned at regular intervals.
Wash the drip tray with warm soapy water,
using a non-abrasive washing liquid, rinse
and dry thoroughly. The drip tray base and
cover are dishwasher safe.
BES810BSS_ANZ_IB_E14.indd 25
2 3
Wipe steam wand after Clean hole with pin
each use
4
Remove tip
CLEANING ThE STORAGE TRAy
The storage tray can be removed after the
drip tray is removed then cleaned with
a soft, damp cloth (do not use abrasive
cleansers, pads or cloths which can scratch
the surface).
STORING yOUR MAChINE
Before storing, press the POWER button to
off, turn the Control Dial to 'Standby' and
unplug.
Insert all accessories into position or into
the storage tray.
Store upright. Do not place anything on top.
WARNING
Do not immerse power cord, power
plug or appliance in water or any other
liquid. The water tank should never be
removed or completely emptied during
decalcifying.
5
Soak tip overnight then
re-attach
25
27/06/2014 5:26 pm