Registering The Remote Control Codes For Playback Devices - Yamaha RX-V500D Owner's Manual

Registering the remote control codes for
SOURCE z
CODE SET
CODE SET
playback devices
SOURCE RECEIVER
SOURCE/RECEIVER
HDMI
1 2 3 4
You can use the unit's remote control to operate playback devices if
Input selection keys
MHL
you have registered their remote control codes. You can also use
1 2 3 5
AV
the input selection keys to change the playback devices that are
4 5 6
controlled by the remote control, because their remote control
V-AUX USB NET
codes are assigned to the input selection keys.
AUDIO
TUNER TUNER
FM FM DAB DAB
PRESET PRESET TUNING TUNING
INFO INFO MEMORY MEMORY
• If you assign the remote control code for an external device to the star (★ or ★★)
MOVIE MOVIE MUSIC MUSIC SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
key, you can operate the device with the remote control without switching the input
source after pressing the star key.
ENHANCER ENHANCER DIRECT DIRECT
SLEEP SLEEP
SCENE SCENE
1
BD BD
TV TV NET NET RADIO RADIO
DVD DVD
SETUP SETUP OPTION OPTION
Menu operation keys
ENTER VOLUME VOLUME
RETURN D DISPLAY
TOP POP-UP
MUTE MUTE
MENU MENU
MODE MODE
External device
2
operation keys
DISPLAY
1 2 3 4
Numeric keys
5 6 7 8
9 0 10 ENT
TV
TV operation keys
INPUT
TV VOL TV CH
MUTE
3
4
Once the remote control code is registered successfully,
SOURCE/RECEIVER blinks twice.
If it blinks six times, registration has failed. Repeat from Step 2.
• For details on how to register a remote control code to a SCENE key, refer to
"Configuring scene assignments" (p.35).
Use "Remote Control Code Search" in the CD-ROM
to find the remote control code for your playback
device.
• If there are multiple remote control codes, register the first code in the list. If
that does not work, try the other codes.
Press CODE SET using a pointed object such as the
tip of a ballpoint pen.
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 2.
Press the input selection key.
For example, press HDMI 1 to set the remote control code
for the playback device connected to the HDMI 1 jack.
Use the numeric keys to enter the 4-digit remote
control code.
■
Playback device operations
Once you have registered the remote control code for your
playback device, you can control it using the following keys after
selecting the input source or scene.
• By pressing SOURCE/RECEIVER, you can switch the devices (the unit or
external device) that are operated by the menu operation keys, DISPLAY and
numeric keys. You can operate the unit when SOURCE/RECEIVER lights up in
orange, and an external device when SOURCE/RECEIVER lights up in green.
For example, if you register the remote control code of your BD/DVD player on
HDMI 1, you can operate the unit when SOURCE/RECEIVER lights up in orange,
and the BD/DVD player when SOURCE/RECEIVER lights up in green.
SOURCE z
Cursor keys
Menu operation
ENTER
keys
RETURN
DISPLAY
TOP MENU
POP-UP
MENU
s
d
External device
a
operation keys
h
j
f
g
Numeric keys
TV operation keys
• These keys work only if the corresponding function is available on your playback
device and if the device can be operated with an infrared remote control.
CONFIGURATIONS ➤ Controlling external devices with the remote control
Turns on/off the playback device.
Select an item.
Confirms a selected item.
Returns to the previous screen.
Switches information on the display.
Displays the top menu.
Displays the pop-up menu.
Stops playback.
Stops playback temporarily.
Starts playback of the selected
song/video.
Searches forward/backward (by
holding down).
Skips forward/backward.
Enter numerical values.
Control the TV (p.86).
En
87