Setup Menu Items - Yamaha RX-V500D Owner's Manual

Setup menu items

Menu Item
Configuration
Speaker
Distance
Level
Equalizer
Test Tone
HDMI Configuration
DSP Parameter
Sound
Lipsync
Volume
Function
Subwoofer Selects whether or not a subwoofer is connected.
Front Selects the size of the front speakers.
Center Selects whether or not a center speaker is connected and its size.
Surround Selects whether or not surround speakers are connected and their size.
Crossover Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to "Small".
Subwoofer Phase Sets the phase of the subwoofer.
Extra Bass Sets the speakers to produce the front channel low-frequency components.
Sets the distance between each speaker and listening position.
Adjusts the volume of each speaker.
Adjusts the tone with an equalizer.
Enables/disables the test tone output.
HDMI Control Enables/disables HDMI Control.
Audio Output Selects a device to output audio.
Standby Through Selects whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode.
TV Audio Input Selects an audio input jack of the unit to be used for TV audio input.
Standby Sync Selects whether to use HDMI control to link the standby behavior of the TV and the unit.
ARC Enables/disables ARC.
SCENE Enables/disables SCENE link playback.
Enables/disables CINEMA DSP 3D.
CINEMA DSP 3D Mode
Panorama Enables/disables the broadening effect of the front sound field.
Center Width Adjusts the broadening effect of the center sound field.
Dimension Adjusts the difference in level between the front and surround sound fields.
Center Image Adjusts the center orientation level (broadening effect) of the front sound field.
Select Selects the method to adjust the delay between video and audio output.
Adjustment Adjusts the delay between video and audio output manually.
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
Max Volume Sets the maximum volume to prevent excessive loudness.
Initial Volume Sets the initial volume for when this receiver is turned on.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
Page
72
72
72
72
73
73
73
74
74
74
74
75
75
75
75
76
76
76
76
76
77
77
77
77
77
78
78
78
70
En