Lexmark C91x Service Manual page 94

5055-xxx
Message
37 Insufficient
Defrag
Memory
37 Insufficient
Memory
38 Memory
Full
39 Complex
Page
4 <x>
Unsupported
Firmware Card
2-44
Service Manual
Meaning
The printer cannot
defragment flash memory.
The printer memory is full
and cannot continue
processing current jobs.
The printer is processing
data, but the memory is full.
The print information on the
page is too complex.
The printer detects an
unsupported version of
firmware on the installed
firmware card.
Action
• Delete fonts, macros, and
other data in printer
memory.
• Install additional printer
memory.
• Press Go to clear the
message and continue
printing.
• Press Stop to clear the
message without deleting
print jobs.
• Press Menu to open the
Job Menu and cancel the
current job.
• Press Go to clear the
message and continue
printing.
• Press Menu to open the
Job Menu and cancel the
current job.
• Press Go to clear the
message and continue
printing.
• Press Menu to open the
Job Menu and cancel the
current job.
• Turn the printer off and
then press and hold Go
while turning it on,
bypassing the code on the
firmware card.
• Remove the firmware
card.