Table of Contents
Advertisement
"RF680M" software
9.5 The functions in the "Tag" menu
Note
ID check
It is checked for all tags before any read or write procedure whether the tag ID displayed in
the editor corresponds to the ID of the tag that is located in the field of the SIMATIC
RF680M. If this is not the case, time-out will be displayed after 20 seconds.
See also
Settings (Page 75)
9.5.6
Copying tag data
You can use this function to transfer data, for example, from one tag to another.
Procedure for copying data
To copy data from one tag to another, proceed as follows:
1. Scan the tag ID of the tag from which you want to copy data, as described in the Chapter
2. From the list of tag IDs, select the ID of the transponder whose data you want to copy.
3. Click the "Data" button. The data editor is displayed.
4. Click the "Read" button to display the data of the currently scanned tag in the editor.
5. Click on the "Copy" button:
6. The window for scanning tags is displayed.
7. Scan the tag to which you want to copy the data.
8. From the list of tag IDs, select the tag (or the ID) onto which you want to copy the data.
9. Click the "Copy" button. The data will be transferred to the tag.
66
Scanning RFID tags and their tag ID (Page 61).
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
SIMATIC RF680M Mobile Reader
Advertisement
Table of Contents
