Plugging In The Power Cord And Grounding - LG WM2240 Series Service Manual

16
INSTALLATION
4
Check the washing machine's level again.
- Push or rock the top edges of the washing machine
gently to make sure that the washing machine does not
rock.
- If the washing machine rocks, repeat steps 1 to 3.
CAUTION
Using the washing machine without leveling, it may
y
result in malfunction caused by the production of
excess vibration and noise.
If you are installing the washing machine on the
y
optional pedestal, you must adjust the leveling feet
on the pedestal to level the washing machine. The
washing machine´s leveling feet should be minimized
and turn the locknuts counterclockwise to secure.
Use the leveling feet only when you level the washing
y
machine. If you raise the leveling feet unnecessarily, it
may cause abnormal vibration of the washing machine.
Using non-skid pads (optional)
If you install the washing machine on a slippery surface, it
may move because of excessive vibration. Incorrect leveling
may cause malfunction through noise and vibration. In the
event of this, lay the non-skid pads under the leveling feet
and adjust the level.
1
Clean the floor to attach the non-skid pads.
- Use a dry rag to remove and clean foreign objects or
moisture. If moisture remains, the non-skid pads may
slip.
2
Adjust the level after placing the washing machine in the
installation area.
- See page 15, Leveling the washing machine.
3
Place the adhesive side of the non-skid pad on the floor.
- It is most effective to install the non-skid pads under the
front legs. If it is hard to place the pads under the front
legs, place them under the back legs.
This side up
Adhesive
side
4
Check the washing machine's level again.
- Push or rock the top edges of the washing machine
gently to make sure that the washing machine does not
rock. If the washing machine rocks, level the washing
machine again (page 15).
Plugging in the power cord and
grounding
Make sure to ground the washing machine to prevent a short
circuit or an electric shock when plugging in.
Using a 3-prong outlet
Plug in the electrical outlet without additional grounding.
CAUTION
Do not use a worn or damaged power cord or power
y
plug. Replace or repair it immediately. Failure to do so
may result in death, fire, electric shock, or malfunction.
Do not modify the power cord and take care not to
y
damage it when installing or moving the washing
machine. Failure to do so may result in death, fire,
electric shock, or malfunction.
Make sure that the washing machine is grounded.
y
- Connect the ground power plug that came with
the washing machine to a grounded outlet. See
the installation instructions for a detailed grounding
process.
- Make sure that the grounding of the electrical outlet
conforms to the local wiring codes and regulations.
- Contact an authorized electrician for the grounding and
installation of the washing machine if the plug and the
electrical outlet do not fit together. Failure to do so may
result in death, fire, electric shock, or malfunction.
- You are responsible for installing an electrical outlet
suitable for this washing machine by contacting an
authorized electrician.
Connect this washing machine to a grounded outlet
y
conforming to the rating prior to use. Failure to do so
may result in fire, electric shock, or malfunction.
Do not use adaptors or extension cords. The washing
y
machine should always be plugged into its own
individual electrical outlet which has a voltage rating
that matches the rating plate. Failure to do so may
result in fire, electric shock or disorder.
Do not damage or cut off the ground prong of the
y
power cord. Doing so may cause death, fire, electric
shock, or product malfunction.
Make sure to use a power cord with a ground terminal.
y
Failure to do so may cause death, fire, electric shock,
or product malfunction.
The appliance and outlet must be positioned so that the
y
plug is easily accessible.
Time-delay fuse or circuit breaker is recommended.
y
It is the personal responsibility and obligation of the
y
product owner to have a proper outlet installed by a
qualified electrician.