Specifications - LG WM2240 Series Service Manual

Problem
Power is not turned on
The door does not open
when the cycle pauses or
finishes
The wash cycle time is
longer than usual
It is musty or moldy in the
tub

SPECIFICATIONS

Model WM2240*
Description
Electrical requirements
Max. water pressure
Dimensions
Net weight
Max. spin speed
Possible Causes
Is the power cord plugged in properly?
y
Has a house fuse blown, a circuit breaker
y
tripped, or a power outage occurred?
Is the temperature in the tub too high?
y
Is the tub full of water?
y
Is the washing machine overloaded? Are other
y
options added to the wash cycle?
Has the incorrect detergent been used?
y
Did you clean the tub periodically?
y
Front-Loading Washer
120 VAC @ 60 Hz.
100 - 800 kPa (14.5 - 116 PSI)
68.6 cm (W) X 75.6 cm (D) X 98.3 cm (H), 129.5 cm (D with door open)
27" (W) X 29 3 / " (D) X 38 11 /
4 16
87 kg (192 lb.)
1,200 RPM
Make sure that the plug is secured in a
y
grounded 3-prong, 120 V (60 Hz) outlet.
Reset the circuit breaker or replace the fuse.
y
Do not increase the fuse capacity. If the
problem is a circuit overload, have it corrected
by a qualified electrician.
The washing machine has a safety lock built
y
into the door to prevent burning. Leave the
door closed and wait until the door lock icon
disappears from the display.
Wait until the wash cycle is completely
y
finished or turn
drain the water from the tub and open the
door.
This is normal. The washing machine
y
automatically adjusts the cycle time for the
amount of laundry, water pressure, water
temperature, and other operating conditions.
Use only HE (High-Efficiency) detergent
y
recommended for a front-loading washing
machine.
See page 31, clean the inside and outside of
y
the washing machine periodically.
" (H), 51" (D with door open)
37
SPECIFICATIONS
Solutions
B
knob to Drain & Spin to