Lopi Freedom Fireplace Insert Owner's Manual page 30

Make sure the door retainer is centered on the door shell.
You can gauge the alignment by looking at the gaps here.
1/8" Hex Wrench
Once the door is aligned, tighten
the two set screws on the bottom
of the door shell to secure the
door retainer.
1/16" Hex Wrench
Slide the ashlip trim into place then tighten the three
set screws on the bottom of the ashlip to secure.
NOTE: in rare cases the door retainer may not line up with
the door shell, preventing the door handle from lining up
correctly. To adjust the position horizontally, loosen the set
screws (see step 3) and adjust the door retainer position. To
adjust vertically, remove the retainer and adjust the clips on
the door shell (see step 2).
9/16" Wrench