Available Accessories - Kohler PRO 5.4 DES Owner's Manual

Available Accessories

The most customizable generators the job site has ever seen.
Mobility Kit
Install Mobility Kit
NOTE: Place blocks underneath to raise
generator to install wheels and legs.
Mobility kit includes 2 solid rubber wheels, 2
legs, 1 handle and mounting hardware.
Install Wheels:
1. Bring bracket of wheel under frame and align
screw holes with bracket holes. Thread 4
screws with washers into holes of frame.
2. Torque screws to 216 in. lb. (24.4 N·m).
3. Install wheels onto axle, push cotter pin into
hole in axle.
Install Legs:
1. Align screw holes with leg holes. Thread 4
screws with washers into holes of frame.
2. Torque screws to 216 in. lb. (24.4 N·m).
38 590 01 Rev. B
Install Handle:
1. Press 4 rubber bumpers into legs and 4 end
caps into legs and handle.
2. Align handle with holes on leg.
3. Install screws with washers through leg.
Place another washer on other side and
thread nut on.
4. Tighten screws enough to allow handle to
move free.
Wireless Remote Kit
Wireless remote for starting or stopping
generator from a distance of up to 164 ft.
(50 m). No tools required for installation.
Wireless remote kit includes 1 wireless remote,
1 receiver which plugs into generator and
mounting hardware.
KohlerPower.com
EN
13