Op Panel Bottom Cover Removal; Printhead Access Cover Removal - Lexmark X792 7562-4xx Service Manualv

7562

OP panel bottom cover removal

See "Front, right, and top covers" on page 7-3
1.
Remove the operator panel assembly. See
2.
Remove one screw (A), and remove the speaker.

Printhead access cover removal

See "Front, right, and top covers" on page 7-3
1.
Remove the AIO option cover. See
Note: If you have any output options installed, then the option cover is already removed. Remove the
output options and redrive unit instead.
2.
Remove three screws (A), and lift to remove the cover.
4-22
Service Manual
for the part number.
"Operator (OP) panel assembly removal" on page
A (88A0323)
for the part number.
"AIO option cover removal" on page
A (88A0323)
4-107.
4-4.
Previous
Next
Go Back