Sleep Timer; Connecting Headphones - Teac CR-H260iDAB Owner's Manual

Sleep timer

The power can be set to turn off after a specified amount
of time.
Press the SLEEP button repeatedly until the desired setting
appears on the display.
SLEEP 90 (60, 30, 20, 10)
The power will turn off 90 (60, 30, 20,10) minutes later.
SLEEP OFF
The sleep timer is not active.
p The display is dimmed when the sleep timer is active.
p Press the SLEEP button once to check the remaining
time. The remaining time will be shown for 3 seconds,
then the display will return to normal.

Connecting headphones

To listen with headphones, first reduce the volume level to
the minimum. Then, insert the headphones plug into the
PHONES jack and adjust the volume using the VOLUME
knob. No sound will be output from the speakers while
headphones are connected.
VOLUME
25