Setting Up Your Dab Tuner; Listening To Dab Radio - Teac CR-H260iDAB Owner's Manual

Setting up your DAB tuner

SOURCE
The first time you listen to the DAB radio, it will scan for
DAB stations and build a station list.
Press the SOURCE button repeatedly to select "DAB".
The unit will scan for broadcast services in the local area
and add them to the station list as they are found. The scan
should take about 10 seconds.
TEAC CR-H260i
As stations are added to the station list, the number of sta-
tions found is displayed.
After broadcast services have been found, the stations are
listed in alphanumeric order.
p If no broadcast services are found, "NO STATION" will be
displayed. Check that the antenna is correctly con-
nected to the unit.
38

Listening to DAB Radio

2
When the unit is switched to DAB mode for the first time,
the automatic tuning process will start and create a station
list (Full scan).
p After the first time when the unit is switched to DAB
mode, the last station listened to will be tuned in again.
p Up to 30 DAB stations can be stored.
1
Press the SOURCE button repeatedly to
select "DAB".
p You can also select "DAB" by pressing the TUNER button
on the remote control.
DAB
Scanning...
When the scanning process has finished, the DLS (Dynamic
Label Segment, page 39) will appear on the second line
of the display.
Classic
Playing
Classic
DLS message 1/5
1 3