Displaying The Shot Mark Screen (Hd Mode Only) - Sony PMW-EX1R Operating Instructions Manual

S1
S2
The same icons may also be displayed below the
thumbnail image of each frame. If the frame has
multiple markings, one of the icons is displayed,
in the priority order of index frame, shot mark 1,
and shot mark 2.
2.
Timecode indication
The timecode of the frame at the cursor is
displayed.
EXPAND CLIP screen in SD Mode
In SD Mode, the thumbnail images of the first
frames of segment files are displayed for a clip
segmented because its file size exceeded 2GB on
the EXPAND CLIP screen.
120min EXPAND CLIP
00 : 00 : 00 : 00 00 : 09 : 30 : 00
01 / JAN /2009 10 : 53
JPAN0011 _01 DVCAM30P SQ
Detailed information for the clip is displayed at
the bottom of the screen.
The items other than the following are the same as
those on the normal thumbnail screen:
1.
Timecode indication
The timecode of the segmentation file at the
cursor is displayed.
2.
Duration
The duration of the segmentation file at the
cursor is displayed.
Clip Operation menu on the EXPAND CLIP
screen
HD Mode
When you select a frame on the EXPAND CLIP
screen and press the joystick or the jog dial, the
110 Clip Operations
Index frame
Frame with shot mark 1 added
Frame with shot mark 2 added
Current frame number
0000001
00 : 19 : 00 : 00
TCR 00 : 00 : 00 : 00
DUR 00 : 09 : 30 : 00
1 2
Clip Operation menu pops up to enable further
operations.
Item Function
EXPAND To decrease the number of
(COARSE) partitions of the clip
EXPAND To increase the number of
(FINE) partitions of the clip
PAUSE To set to Pause mode at the
selected frame
SET INDEX PIC To specify the selected frame for
the index frame of the clip (page
112)
SHOT MARK1 To add shot mark 1 to the selected
ADD frame (page 111)
SHOT MARK2 To add shot mark 2 to the selected
ADD frame (page 111)
SHOT MARK1 To delete shot mark 1 from the
DEL selected frame (page 111)
SHOT MARK2 To delete shot mark 2 from the
DEL selected frame (page 111)
DIVIDE CLIP To divide the clip into two clips at
the selected frame (page 112)
SD Mode
You can select "PAUSE" only on the EXPAND
CLIP screen in SD Mode.
Displaying the SHOT MARK
Screen (HD Mode Only)
When one or more shot marks are recorded for a
single clip in HD Mode, the SHOT MARK screen
permits you to display only the marked frames as
the thumbnail images on the screen.
1
Select a clip on the thumbnail screen.
2
Press the joystick or the jog dial.
The Clip Operation menu pops up.
3
Select "SHOT MARK," "SHOT
MARK1," or "SHOT MARK2."
SHOT MARK: To display thumbnails only
of the frames marked with shot mark 1
and/or shot mark 2 recorded
SHOT MARK1: To display thumbnails only
of the frames marked with shot mark 1
SHOT MARK2: To display thumbnails only
of the frames marked with shot mark 2