Lcd/Vf Set Menu - Sony PMW-EX1R Operating Instructions Manual

VIDEO SET
Menu items Setting values
Down Squeeze / Letterbox / Edge
Crop
Converter
Selecting the
operation mode of
the down converter
24P System 60i / 24PsF
Selecting 24P
mode

LCD/VF SET Menu

LCD/VF SET
Menu items Subitems and setting values Contents
LCD Color
–99 to +99 (±0)
Adjusting the LCD
monitor
Contrast
–99 to +99 (±0)
Brightness
–99 to +99 (±0)
EVF Backlight
High / Low
Setting the
viewfinder
Mode
Color / B&W
Contrast
–99 to +99 (±0)
Brightness
–99 to +99 (±0)
Power
Auto / On
Peaking Color
White / Red / Yellow / Blue
Setting the peaking
function for the
Level
LCD monitor/EVF
High / Mid / Low
[M]
Contents
Set the output mode (aspect) when outputting from the A/V
OUT connector, or when outputting SD signals in HD Mode
from the COMPONENT OUT and SDI OUT connectors.
(The setting cannot be changed when an SD format is selected
with "Output Select.")
Squeeze: To horizontally reduce a 16:9 picture to output a 4:3
picture
Letterbox: To mask the upper and lower areas of a 4:3 picture
to display a 16:9 picture in the center of the screen
Edge Crop: To cut the both sides of a 16:9 picture to output a
4:3 picture
Select the video output format when the video format is HQ
1920/24P or HQ 1440/24P (invalid with video formats other
than HQ 1920/24P and HQ 1440/24P).
Adjust the color of pictures on the LCD monitor.
Adjust the contrast of pictures on the LCD monitor.
Adjust the brightness of pictures on the LCD monitor.
Select the brightness of the EVF backlight.
Select the display mode of the EVF in Camera mode.
Color: Color mode
B&W: Monochrome mode
Adjust the contrast of pictures on the EVF screen.
Adjust the brightness of pictures on the EVF screen.
Set the condition to turn the EVF on.
Auto: To turn it on when the LCD monitor is closed or rotated
to the upside-down position.
On: To keep it on regardless of the status of the LCD monitor
Select the color of the peaking signal.
Set the level of the peaking signal.
Setup Menu List 129