Section 2 Disassembly - Sony MDR-RF415R Service Manual

Note : Follow the disassembly procedure in the numerical order given.
2-1. RX-BASE BOARD
Precaution for installtion
1 Slide the suspender in the
direction of the arrow.
Suspender
SECTION 2
DISASSEMBLY
1 Five screws (P 2 × 6)
7
Claw
2 Set the push
switch (1 key).
Cover (R), hanger
9 Switch, push (1 key)
8 Remove the two solderings.
6 RX-BASE board
5
4 Screw (P 2 × 8)
3 Remove the
nine solderings.
Precaution for installtion
No.205
No.203
No.204
No.203 (black)
Solder the each lead wires directly to the position as shown
while being cautions of colors.
MDR-RF415R
2
Claw
RX-BASE board
No.204
No.201
No.201 (green)
No.202
No.202 (red)
3