Sony Walkman MZ-R91 Operating Instructions Manual page 69

Press VOL +/– to move the cursor to
left or right.
Press + when inputting alphabet,
symbol or numbers to change the letter
to the one before/next one. Press =
to go back.
Press END SEARCH together with
VOL + to insert a blank space to type
in a new letter.
Press END SEARCH together with
VOL – to delete a letter and move back
all following letters to the left.
Press p or T MARK to cancel labeling.
5 Repeat step 4 and enter all characters
of the label name.
6 Press down the jog lever for 2 seconds
or more.
The track or disc is labeled.
Labeling a track during playback
1 Insert a disc and play the track you
want to label.
2 Press the jog lever so that "EDIT"
flashes in the display, and then press
the lever again.
" : Name" flashes in the display.
3 Press the jog lever again.
Follow steps 4 to 6 of "Labeling a disc
4
during stop" above.
Labeling a track or a disc during
recording
1 While recording, press the jog lever so
that "EDIT" flashes in the display, and
then press the lever again.
" : Name" flashes in the display.
To label a track, press the jog lever
2
again.
To label a disc, flip the lever until
" : Name" flashes in the display,
and then press the lever.
3 Follow steps 4 to 6 of "Labeling a disc
during stop" above.
Note
When the recording is stopped while
labeling a track or a disc during recording,
or when the playback moves on to the next
track while labeling a track during
playback, the input at that point is entered
automatically.
To cancel labeling, press p or T MARK.
Labeling on the remote control
See the illustration in the Japanese text
(page 35)
Labeling a disc during stop
1 Insert a disc.
To label a disc that is already in the
recorder, press p to stop.
Press DISPLAY for 2 seconds or
2
longer.
" : Name" flashes in the display.
Press p.
3
The disc is ready to be labeled.
Press the control towards = or
4
towards (•+ repeatedly to select a
letter and press p to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
Press P to switch between katakana,
the alphabet, symbols/numbers, and
phrases (if phrases are stored in the
phrase bank).
Press VOL +/– to move the cursor to
left or right.
Press the control towards (• +
when inputting alphabet, symbol or
numbers to change the letter to the one
before/next one. Press towards = to
go back.
Press DISPLAY to insert a blank space
to type in a new letter.
Press DISPLAY for 2 seconds or more
to cancel labeling.
Press PLAY MODE to delete a letter
and move back all following letters to
the left.
5 Repeat step 4 and enter all characters
of the label name.
6 Keep pressing p for 2 seconds or
longer.
The track or disc is labeled.
69