Adding A Track Mark - Sony Walkman MZ-R91 Operating Instructions Manual

zEditing recorded tracks
You can edit your recordings.
Premastered MDs cannot be edited.
Notes on editing
• Do not move or jog the recorder while "TOC
Edit"* is flashing in the display.
• You cannot edit tracks on an MD that is
record -protected. Before editing tracks,
close the tab on the side of the MD.
• If you perform an editing operation while
playing, be sure not to turn the power off
until "TOC Edit" disappears in the display.
• The lid does not open until "TOC Edit"
disappears in the display after editing.
* TOC = Table of Contents
Erasing a track
See the illustration in the Japanese text
(page 30).
You can quickly erase a recorded track.
Note that once a recording has been erased,
you cannot retrieve it.
1 While playing the track you want to
erase, press the jog lever so that
"EDIT" flashes in the display, then
press the lever again.
" : Name" flashes in the display,
and the recorder plays the selected
track repeatedly.
2 Flip the jog lever until "
flashes in the display, and then press
the lever.
"Erase OK?" and "PushENTER"
appear alternately in the display.
To cancel erasing, press p or T MARK.
3 Press the jog lever again.
The track is erased and the next track
starts to play. All the tracks after the
one erased are automatically
renumbered.
To erase a part of a track
Add track marks at the beginning and the
end of the part you want to erase, then
erase the part.
Erasing a whole disc
See the illustration in the Japanese text
(page 31).
You can quickly erase all the tracks and
data of the MD at the same time. Note that
once a recording has been erased, you
cannot retrieve it.
1
2
3

Adding a track mark

See the illustration in the Japanese text
(page 31).
You can insert a track mark into a track.
: Erase"
1
To add track marks while
recording (except while synchro-
recording)
Press T MARK at the point you want to add a
track mark.
While the recorder is stopped, press
the jog lever so that "EDIT" flashes in
the display, and then press the lever
again.
" : Name" flashes in the display.
Flip the jog lever until "
flashes in the display, and then press
the lever.
"AllErase?" and "PushENTER" appear
alternately in the display.
To cancel erasing, press p or T MARK.
Press the jog lever again.
"TOC Edit" flashes in the display, and
all the tracks will be erased.
When erasing is complete,
"BLANKDISC" appears in the display.
While the recorder is playing or
pausing an MD, press T MARK on the
recorder at the point you want to
mark.
"MARK ON" appears in the display,
and the track mark is added.
: Erase"
67