Sony Walkman MZ-R91 Operating Instructions Manual page 65

Copying CD text information
while recording (Joint Text)
CD text connecting cable, CD that support
CD-TEXT, and CD player that support
Joint Text required.
See the illustration in the Japanese text
(page 23)
By connecting the recorder to a Sony
portable CD player that supports Joint Text
(the CD text copying function) (D-E01),
you can copy track and disc names
automatically during recording. In
addition to the CD text connecting cable
(RK-TXT1), make sure to connect the
recorder to the portable CD player with an
optical cable.
Slide REC to the right to start
1
recording on the recorder, and start
playing the CD in the portable CD
player.
"SYNC", "REC" and "
the display.
"CD TEXT" appears for a few seconds,
then "001 TEXT?" and "PushENTER"
alternate in the display.
"NO TEXT" appears at this time if no
track name information exists in the
CD. In this case, the track name will
not be copied.
2 Press the jog lever.
Track name scrolls, and then the track
name and "PushENTER" alternate in
the display.
3 Press the jog lever.
Track name scrolls in the display while
the name is copied.
4 Follow steps 2 and 3 to copy each new
track name that appears.
5
6
7
Notes
• If you copy disc name information to a disc
" lights up in
• When the CD text copying function is on,
• The CD text copying function (joint text) can
• The CD text copying function can only be
• The RK-TXT1 CD text connecting cable is
• The remote becomes inoperative when the
• Stopping or pausing playback on the CD
• The track name of the track currently played
Press p on the recorder at the point
you want to stop recording.
" " lights up, and then "000 TEXT"
and "PushENTER" alternate in the
display.
If you don't want to copy the disc
name information, press p again. The
disc name is not copied and the
operation ends.
"NO TEXT" appears at this time if no
disc name information exists in the
CD. In this case, the operation ends
without copying the disc name.
Press the jog lever.
Disc name scrolls, and then disc name
and "PushENTER" alternate in the
display.
Press the jog lever.
"TOC Edit" flashes.
Afterwards, the disc name scrolls in
the display.
with a previously recorded disc name, the
old disc name will be overwritten with the
new one.
various settings and editing functions
cannot be accessed with the jog lever.
only be used with component (D-E01) with
the joint text logo.
used with CDs and component (D-E01). The
CD text copying function can only be used
with CDs that support CD-TEXT.
designed for exclusive use with this recorder
and Sony portable CD player (D-E01). Do
not use a connecting cable of another make
to copy CD text information.
CD text connecting cable (RK-TXT1) is
connected to the recorder.
player automatically causes recording on the
recorder to pause. A new track mark is
automatically added when you resume
recording.
will not be recorded if you stop or pause CD
playback in the middle of the copying
process on the recorder.
65