Operation Instruction - PROEL SPIDER 575 PLCP575 User Manual

OPERATION INSTRUCTION

The main functions of the Special Consol are: performance function (8 built-in
programs), optional programs function, blaze with music function, time function and
speed function, etc.
Please operate the following steps to the consol before control the light.
Connect the control cable between the consol and the light (the cable is 10 meter
length and can be longer if it is necessary); Let the light power on, then the consol and
the light can be operated about 10 seconds later.
1. Reset
Push the RESET key to show the digital in the display window, then the light is on the
reset status.
2. Operate the performance program function
Push START/SHART key, then the built-in 1-8 programs can be used.
Push SPEED key up or down to change the operating speed.
Push TIME key up or down to change the fade time.
3. Operate the program function
Push START key
Push PROGRAM key to choose a program
Move SPEED key up or down to change the operating speed from channel to channel
Move TIME key up or down to change the speed in each channel.
Push START key for starting.
4. Music Blaze
Push AUDIO key, then the music blaze function and the operate program function can
be used. Push again to cancel the operation.
5. Gobo function
Push START key, then the program will be changed.
Push again to cancel the operation.
6. Pause function
Push PAUSE key, then H will be showed in the display window and the program will
be stopped temporarily. Push again to cancel the operation.
7. Other function
Push COLOR/GOBO key to lock the light. Then the color/gobo function will be locked.
10