Operation Instructions - PROEL PLHT575ML User Manual

OPERATION INSTRUCTIONS

The BUG TUBE PAR64 moving head uses LED digital display method to control
-
the channel setting.
The BUG TUBE PAR64 moving head adopts international standard DMX-512
-
signal, multiple lights can be controlled by the controller due to use the channel
setting (the details are listed in Appendix 2
Use the XLR-XLR cable from the signal output port of the consol to connect the
-
signal input port of the first light, connect the signal output port of the first light
with the signal input port of the second light, and so on, until all lights are
connected.
For all installation, having long signal
-
cables or in the presence of electrical
noise, for example a discotheque, it is
recommended practice to use a DMX
terminator: this assist in preventing
corruption of the digital control signal by
external noise. The DMX terminator is
simply an XLR connector with a 120Ω
(Ohm) resistor connected across pins 2
and 3, which is then plugged into the
DIGITAL THRU socket on the last
projector in the chain.
The BUG TUBE PAR64 moving head uses core XLR outlet (plug). A transfer line
-
from 5 core to 3 core will be needed if the controller you use is 5 core outlet
(plug). (Please refer to Appendix 1).
When power is on, the equipment will undertake self-examination, and can
-
undertake operation after the self-examination is finished.
Please don't shake the equipment when it is in operation.
-
14