GMC 2010 Acadia Owner's Manual page 387

Hide thumbs Also See for 2010 Acadia:
Table of Contents

Advertisement

7. Place the jack under the vehicle
as identified in Step 4. Raise the
vehicle by turning the lug wrench
clockwise in the jack. Raise
the vehicle far enough off the
ground so that there is enough
room for the spare tire to fit
under the wheel well.
8. Remove all the wheel nuts and
the flat tire.
9. Remove the plastic spare tire
heat shield by pulling the rubber
latch. Store the plastic spare tire
heat shield. See Storing a Flat
or Spare Tire and Tools later in
this section for more information.
Vehicle Care
WARNING
Rust or dirt on a wheel, or on the
parts to which it is fastened, can
make wheel nuts become loose
after time. The wheel could come
off and cause an accident. When
changing a wheel, remove any
rust or dirt from places where the
wheel attaches to the vehicle. In
an emergency, use a cloth or a
paper towel to do this; but be sure
to use a scraper or wire brush
later, if needed, to get all the rust
or dirt off. See If a Tire Goes Flat
on page 10 57.
10-71

Advertisement

Table of Contents
loading

Table of Contents