GMC 2010 Acadia Owner's Manual page 241

3. Say the name tag of the person
to call.
If the system clearly
recognizes the name tag it
responds with OK, calling,
<name tag> and dials the
number.
If the system is unsure it
recognizes the right name
tag, it confirms the name
tag followed by a tone.
If the name tag is correct,
say Yes . The system
responds with OK, calling,
<name tag> and dials the
number. If the name tag
is not correct, say No .
The system will ask for the
name tag to be re entered.
Once connected, the person called
will be heard through the audio
speakers.
Using the Re dial Command
1. Press and hold
two seconds. The system
responds with Ready followed
by a tone.
2. After the tone, say Re dial . The
system responds with Re dial
using <phone name> and dials
the last number called from the
connected Bluetooth phone.
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
Press and begin speaking
to answer the call.
Press to ignore a call.
Infotainment System
Call Waiting
Call waiting must be supported on
for
the Bluetooth phone and enabled by
the wireless service carrier to work.
Press
incoming call when another call
is active. The original call is
placed on hold.
Press
original call.
To ignore the incoming call,
continue with the original call
with no action.
Press
current call and switch to the call
on hold.
7-53
to answer an
again to return to the
to disconnect the