Hood - GMC 2010 Acadia Owner's Manual

Hide thumbs Also See for 2010 Acadia:
Table of Contents

Advertisement

This vehicle has an airbag system.
Before attempting to do your own
service work, see Airbag System
Check on page 3 45.
Keep a record with all parts receipts
and list the mileage and the date
of any service work performed.
See Maintenance Records on
page 11 11.

Hood

To open the hood, do the following:
1. Pull the hood release handle
with this symbol on it. It is
located under the instrument
panel on the driver's side of the
vehicle.
2. At the front of the vehicle, pull
up on the center of the hood,
and push the secondary hood
release to the right.
Vehicle Care
3. After you have partially lifted
the hood, gas struts will
automatically take over to lift
and hold the hood in the fully
open position.
Before closing the hood, be sure all
filler caps are on properly.
Pull the hood down to close. Lower
the hood until the lifting pressure
of the strut is reduced. Then allow
the hood to fall and latch into place
under its own weight. Check to
make sure the hood is closed. If the
hood does not fully latch, gently
push the hood down at the front
and center of the hood until it is
completely latched.
10-5

Advertisement

Table of Contents
loading

Table of Contents