Canon iPF785 Series Basic Manual page 34

Replacing the Printhead
6
Holding the new Printhead by the grips (a), remove it
from the pouch.
Important
7
While firmly holding the Printhead you have removed,
use your other hand to remove the orange Protective
Part (a). Squeeze the grips (c) of Protective Part (b)
and pull it down to remove it.
Important
34
When handling the Printhead, always hold it by the grips (a). Never touch the nozzles (b) or metal con-
•
tacts (c). This may damage the Printhead and affect printing quality.
Never touch the ink supply section (d). This may
•
cause printing problems.
• The inside surface of the Protective Part (a) and Protective Part (b) is coated with ink to protect the noz-
zles. Be careful not to touch these surfaces when removing the caps.
• The Printhead contains ink to protect the nozzles. We recommend removing Protective Part (b) as you
hold it over the Printhead package or safely out of the way to avoid spilling ink and staining your clothes
or the surrounding area. If ink accidentally spills, wipe off the ink with a dry cloth.
• If you need to put a Printhead somewhere temporarily before installation, do not keep the nozzles and
metal contacts facing down. If the nozzles or metal contacts are damaged, it may affect the printing
quality.
• Do not reattach the removed Protective Part. Dispose of these materials in accordance with local regula-
tions.
iPF785 Series
Basic Guide