Zte Mobley User Manual page 20

Enter the username and password, if these are required for the
wireless network.
Click Save.
To select the APN entry to use:
From the drop-down menu beside Profile Selection, select the
desired APN to use.
To remove an APN entry:
Select the APN you want to remove, and click Delete.
Enable DMZ
In a DMZ (demilitarized zone) network configuration, a computer runs
outside the firewall in the DMZ. This computer intercepts incoming
Internet traffic, providing an extra layer of protection for the rest of
the network.
To enable DMZ and designate a computer to screen incoming
traffic:
On the full AT&T Wi-Fi Manager home page, log in as Administrator.
Click Settings on the navigation menu on the left side.
Click Firewall DMZ.
Select Enable beside DMZ.
In the DMZ IP Address field, enter the IP address of the computer
you want to have in the DMZ.
Click Apply.
32
Set Router Options
To set the mobile hotspot's LAN options:
On the full AT&T Wi-Fi Manager home page, log in as Administrator.
Click Settings on the navigation menu on the left side.
Click Advanced Router.
Enter the desired information in each section.
If the DHCP Server is enabled, it automatically assigns an IP address
to each device on the network and manages their configuration
information.
Click Apply.
Set Power Save Options
The user may define a time period for the mobile hotspot to stay
on when the vehicle is turned off or idle. Starting the vehicle will
always power on the hotspot. The mobile hotspot will power off
automatically if the voltage of the OBD II connector drops to 9V.
On the AT&T Wi-Fi Manager home page, log in as Administrator.
Click Settings on the navigation menu on the left side.
Click Advanced Power Save.
Select the time period from the drop-down menu.
33