Zte Mobley User Manual page 19

Enable MAC/IP/Port Filtering
You can enable or disable the MAC/IP/port filtering feature as
needed to block certain Internet traffic. If this setting is enabled,
you can then choose whether traffic is Accepted or Dropped by
default by selecting the appropriate option from the Default Policy
drop-down menu.
To enable port filtering:
On the full AT&T Wi-Fi Manager home page, log in as Administrator.
Click Settings on the navigation menu on the left side.
Click Firewall MAC/IP/Port Filter.
Select the Default Policy:
• Accepted – Internet traffic is allowed by default. Only traffic from
the selected applications will be blocked from accessing the
Internet. Traffic is identified by port numbers. Some applications
are predefined. You can define additional applications by clicking
the Add Custom Application button, but you need to know
details of the traffic used and generated by the applications you
wish to define. In particular, you need to know the port numbers
and the protocol (TCP, UDP) used by outgoing traffic.
• Dropped – Internet traffic is blocked by default. Only traffic from
the selected predefined or custom applications are allowed to
access the Internet.
Click Apply.
30
Enable VPN Passthrough
If you want to connect to a corporate network using VPN, you first
need to enable VPN connections (passthrough).
To enable VPN passthrough:
On the full AT&T Wi-Fi Manager home page, log in as Administrator.
Click Settings on the navigation menu on the left side.
Click Advanced Router.
In the VPN Passthrough section, select Enable beside VPN
Passthrough.
Click Apply.
Configure APN Details
The APN is checked to determine the type of network connection to
establish. Your mobile hotspot comes preconfigured with the APN
(Access Point Name) for AT&T.
To add an APN for another network:
On the full AT&T Wi-Fi Manager home page, log in as Administrator.
Click Settings on the navigation menu on the left side.
Click Network APN.
Click Add.
In the blank line, enter the profile name, APN (obtained from your
carrier).
Select the network Authentication mode. The options are
None (default), CHAP, and PAP.
31