Working Instruction, Mechanical
3.42 LED-Flash Assembly
Follow the 2.1.1 – 2.1.6 Disassembly instructions!
Remove the inside screw from the loud speaker box
assembly by using the NTZ 112 1052 (JCIS bit).
Replace the screw if it's damaged otherwise it can be
reused.
Remove the LED-flash assembly with a blunt pair of
tweezers.
±
A
PPLY 7 NCM
1.5 NCM OF TORQUE FOR THE SCREW USING
JCIS BIT
!
NTZ 112 1052 (
)
Assemble and tighten the screw in the new LED-flash
assembly.
The LED-flash assembly is now reassembled.
Replace the screws if it's damaged otherwise it can be
reused.
Follow the 4.1.4 – 4.1.8 Reassembly instructions!
3/000 21-1/FEA 209 544/104 C
59(87)
©
Sony Ericsson Mobile Communications AB