Flash Led; Bluetooth; Wlan - Sony Ericsson Xperia Mini Pro Test Instructions

Tests: Service Tests

2.2.13 Flash LED

Check the Flash LED at the back side of phone whether it is
turned on.
Press Back key to return to Service Test Menu.

2.2.14 Bluetooth

During this test, the distance between the phone and
the target Bluetooth device must be 1.5 to 5 meters!
Make sure the target Bluetooth device is enabled and
visible always!
The Bluetooth test will be done in following sequences:
Step 1: Enable Bluetooth; wait 4-5 seconds, shows OK;
Step 2: Searching;
Step 3: Device Found list;
Step 4: Select the Target Bluetooth Device, and Type PIN
code to Pair;
Step 5: Type the Pairing PIN code on Target Bluetooth
Device also, when succeeded, it shows "Test
Complete".
Press Back key to return to Service Test Menu.

2.2.15 WLAN

Make sure there's WLAN network before performing this
test.
The WLAN test will be done in following sequences:
Step 1: Enable WLAN; wait 4-5 seconds, shows OK;
Step 2: Searching;
Step 3: Access points Found list;
Step 4: Select the Target WLAN network, and Type
Password to get connection;
Step 5: Enter a web address (ex. google.com)
Step 6: When Connection succeeded, it shows "Test
Complete".
Press Back key to return to Service Test Menu.
1251-8385 Rev 1
©
Sony Ericsson Mobile Communications AB – Company Internal
Test Instructions (mech)
Distance :
1.5 to 5 meters
Sony Ericsson
Bluetooth
Enable Bluetooth OK
Searching
Devices found
Test Complete
XPERIA
Sony Ericsson
Sony Ericsson
WLAN
Enable WLAN OK
Searching
Access points found
Connect to .....
Connection successfully
setup
Enter WEB address to
connect to
Connect to http:// ....
Test Complete
XPERIA
Sony Ericsson
Bluetooth
Enable Bluetooth OK
Searching
Devices found
Test Complete
XPERIA
11(22)