Cleaning - LG HECTO Owner's Manual

8 SAFETY INSTRUCTIONS
• Do not block the light emitted from
the product's lens with a book or a
cover. Long exposure to the light
may melt or burn the object, possibly
causing fire. In addition, the lens may
be overheated and the product may
be damaged by the reflected light.
Stop projecting temporarily or turn off
the power.
• Do not start the product with volume
high.
- High volume may damage hearing.
Be sure to lower the volume before
turning off the product. Raise the
volume gradually after turning on
the product.
• When you go out, place the product
out of reach of pets or other animals,
and unplug it from the wall outlet.
- Otherwise, it may cause short circuit
and fire.

Cleaning

WARNING
• Do not spray water directly to the
product when cleaning. Do not allow
water to get into the product or do not
allow it to get wet.
- This may cause fire or electric
shock.
• In the event that smoke or a strange
smell comes out from the product or
a foreign object falls into the product,
stop using it. Switch off the product,
unplug it from the power outlet and
contact our service center.
- Otherwise, this may cause fire or
electric shock.
• To remove dust or stains on the cover
glass, use an air spray or use a swab
or soft cloth to wipe the glass gently.
CAUTION
• Contact your seller or our service
center once a year to clean the
internal parts of the product.
- If you do not clean the Laser
Display for a long period of time,
dust will accumulate, which may
cause fire or damage to the product.
• When cleaning plastic parts, such as
the product case, unplug the power
first and wipe with a soft cloth. Do
not spray with water or wipe with a
wet cloth. When cleaning the plastic
parts, such as the product case,
do not use cleanser, automobile or
industrial shiner, abrasive or wax,
benzene, alcohol, etc., which can
damage the product.
- This can cause fire, electric shock
or product damage (deformation,
corrosion and damage).