Pairing The Magic Remote Control; Re-Pairing The Magic Remote Control; Using The Magic Remote Control - LG HECTO Owner's Manual

Pairing the Magic Remote Control

You must pair the Magic remote control with the Laser Display to use it.
Pair the Magic remote control prior to use as follows:
1
Turn on the Laser Display and press the
Display. When the pairing is complete, the pairing completion message is displayed
on the Laser Display screen.
2
If the remote failed to pair, turn the Laser Display off and on and try pairing again by
pressing the

Re-pairing the Magic Remote Control

1
Press the SETTINGS button and
5 seconds.
HOME
The Magic remote control will pair again when you press the
2
Press the BACK button while pointing the remote control at the Laser Display for
about 5 seconds to reset and pair the remote control. When the pairing is complete,
the pairing completion message is displayed on the Laser Display screen.

Using the Magic Remote Control

1
Shake the Magic remote control lightly when there is no pointer displayed on the
screen. A pointer will be displayed on the screen.
→ The pointer disappears if the remote control is not used for a
certain period of time.
?
2
When you move the pointer signal transmitter up/down/left/right
while pointing it toward the Laser Display, the pointer moves.
/
→ If the pointer is not working properly, do not move the Magic
remote control for about 10 seconds, and then try again.
NOTE
• Use the remote control within the specified range (10 meters). You may
experience communication failures when using the device outside the coverage
area or if there are obstacles within the coverage area.
• You may experience communication failures depending on nearby devices.
Devices, such as a microwave oven and wireless LAN, operate in the same
frequency band (2.4 GHz) as the Magic remote control. This may cause
communication failures.
• The Magic remote control may become damaged or may malfunction if it is
dropped or receives a heavy impact.
• Take care not to bump into nearby furniture, electronics or other people when
using the Magic remote control.
Wheel (OK) button.
MAGIC REMOTE CONTROL
Wheel (OK) button towards the Laser
BACK button at the same time for about
27
wheel (OK) button.