1. Manuals
  2. Brands
  3. LG Manuals
  4. Monitor
  5. HECTO
  6. Owner's manual

LG HECTO Owner's Manual

Laser display
Hide thumbs Also See for HECTO:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
OWNER'S MANUAL
Laser Display
Please read the safety information carefully before using the product.
HECTO
www.lg.com

Advertisement

Table of Contents
loading

Related Manuals for LG HECTO

Summary of Contents for LG HECTO

  • Page 1 OWNER'S MANUAL Laser Display Please read the safety information carefully before using the product. HECTO www.lg.com...

  • Page 2: License

    LICENSE LICENSE Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx. com for more information and software tools to convert your files into DivX videos.

  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please take note of the safety instructions to prevent any potential accident or misuse of the Laser Display. Safety precautions are given in two forms, i.e. Warning and Caution as detailed below. WARNING: Failure to follow the instructions may cause serious injury and even death.

  • Page 4: Indoor Installation

    SAFETY INSTRUCTIONS Read these instructions. of the product and the wall should Keep these instructions. be more than 30 cm for ventilation Heed all warnings. purposes. Follow all instructions. - Otherwise, this may cause the internal temperature of the product Indoor Installation to rise and cause fire.

  • Page 5: Power

    SAFETY INSTRUCTIONS Power CAUTION • When installing the product on a table WARNING or shelf, be careful not to place it near • The grounding wire should be the edge. connected. - This may fall causing injury to persons or the product malfunction. - Be sure to connect the grounding wire to avoid damage to the product Make sure that you use the cabinet...

  • Page 6: When In Use

    The • Only use the official power cord strong light may damage your eyes. provided by LG Electronics. Do not • When the product is on or has just use other power cords. been turned off, avoid touching the - This may cause fire or electric air vent because it will be very hot.
  • Page 7 SAFETY INSTRUCTIONS • Never touch the product or power CAUTION cord during thunder or lightning. • Do not place a heavy object on the - This may cause electric shock. product. • Do not use the product near - It may fall down and cause physical electronic devices that generate a injury.

  • Page 8: Cleaning

    SAFETY INSTRUCTIONS Cleaning • Do not block the light emitted from the product's lens with a book or a cover. Long exposure to the light WARNING may melt or burn the object, possibly • Do not spray water directly to the causing fire.

  • Page 9: Others

    • Do not throw or disassemble the battery. - This may cause fire or explosion due to damage to the battery. • Always use batteries approved and certified by LG Electronics.Failure to do so may cause fire or explosion.

  • Page 10: Eye Care Sensor

    SAFETY INSTRUCTIONS Eye Care Sensor Laser WARNING WARNING • Do not poke the sensor with a sharp • This product contains a laser module. object. Do not disassemble or modify the - This can damage the sensor and product as this could be dangerous. cause it to malfunction.
  • Page 11 SAFETY INSTRUCTIONS LASER RADIATION DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT - This Laser Display is a Risk Group 2 Viewing direction Screen device that meets safety standard IEC 62471 standard. Risk Group 2 Laser beam CAUTION. Possibly hazardous optical direction radiation emitted from this product.
  • Page 12 SAFETY INSTRUCTIONS 1) this device may not cause harmful FCC NOTICE interference, and 2) this device must Federal Communications accept any interference received, Commission (FCC) Statement including interference that may cause You are cautioned that changes or undesired operation of the device of the modifications not expressly approved device.
  • Page 13 SAFETY INSTRUCTIONS Disposal of your old appliance Disposal of waste batteries/accumulators 1. When this crossed-out wheeled 1. When this crossed-out wheeled bin bin symbol is attached to batteries/ symbol is attached to a product it accumulators of Your product means the product is covered by the it means they are covered by European Directive 2002/96/EC.

  • Page 14: Table Of Contents

    TABLE OF CONTENTS TABLE OF CONTENTS LICENSE SETTING UP THE LASER DISPLAY SAFETY INSTRUCTIONS Setting Up the Laser Display - Indoor Installation - Initial Setup - Power - Watching Laser Display - When in Use Additional Options - Cleaning - Adjusting the Aspect Ratio - Others - Using the Edge Adj Function - Eye Care Sensor...
  • Page 15 TABLE OF CONTENTS CUSTOMIZING SETTINGS MAINTENANCE Settings Cleaning PICTURE Settings - Cleaning Cover Glass SOUND Settings - Cleaning the Laser Display Case TIME Settings Updating the Software OPTION Settings SPECIFICATIONS NETWORK Settings CONNECTING EXTERNAL DEVICES Connecting an HD Receiver, DVD Player, or VCR - HDMI connection - HDMI to DVI Connection...

  • Page 16: Preparation

    PREPARATION PREPARATION Accessories Check the accessories provided with the product. The picture may be different from the actual product. Accessories are subject to change without prior notice in order to improve the performance of the product. New accessories may be added or old ones may be removed.

  • Page 17: Optional Accessories

    HDMI Cable PC Audio Port Cables for Connecting Optical Cable Connection Cable External Devices Ceiling Bracket (AJ-CB100) Sound Bar Accessories Shipped with Product These accessories are shipped with the product when you purchase it. Hecto Laser Display Projection Screen (SC100/ SC105)

  • Page 18: Parts And Components

    PREPARATION Parts and Components Front * This Laser Display is manufactured using high-precision technology. You may, however, see tiny black dots and/or bright spots that continuously appear on the screen. This is a normal result of the manufacturing process and does not indicate a malfunction.

  • Page 19: Back

    PREPARATION Back ❹ ❺ ❻ ❼ ❽ ❾ ❸ ❷ ❶ RS-232C IN ❿ ⓫ Component IN Port ❶ TRIGGER(12 V) Port ❷ Connect an external device (e.g., roll screen) to this port. USB IN1 Port ❸ ❹ H/P OUT Port AV IN Port ❺...

  • Page 20: Status Indicator

    PREPARATION Status Indicator Operation/Status Indicator Operation/ Power standby state (Power is off.) Status Indicator Power standby state White Warm stand-by (Power standby state) White (Brightness The Laser Display is in the process of changes slowly.) turning on or off. In operation Red (blinking) High temperature warning Red (blinking) +...

  • Page 21: Installation

    PREPARATION Installation Installation Precautions • Do not place the product in a hot or • Place the product in a well-ventilated humid environment. environment. - Do not place the product in a hot, - To prevent the internal heat from cold, or humid environment.

  • Page 22: Projection Distance Per Screen Size

    PREPARATION Projection Distance per Screen Size Place the Laser Display on a sturdy level surface, together with the computer or audio/video source. Place the Laser Display at an appropriate distance away from the screen. The distance between the Laser Display and the screen determines the actual size of the image.

  • Page 23: Kensington Security System

    PREPARATION Kensington Security System • This the Laser Display has a Kensington Security Standard connector to prevent theft. Connect a Kensington Security System cable as shown below. • For more information on installation and use of the Kensington Security System, refer to the user guide provided with the Kensington Security System.

  • Page 24: Remote Control

    REMOTE CONTROL REMOTE CONTROL Open the battery cover on the back of the remote control and insert the batteries which is specified in the battery room with poles pointing in the correct direction. The new and same type of batteries (1.5 V AAA) must be used.
  • Page 25 REMOTE CONTROL SETTINGS Displays or closes the Settings menu. AUTO Automatically adjusts the PC input image. Q.MENU Changes the settings easily. Up/Down/Left/Right buttons Switches between menu functions. Shows the current mode and saves changes to the settings. BACK Returns to the previous screen. AV MODE Sets the genrwe for the Laser Display program.

  • Page 26: Magic Remote Control

    MAGIC REMOTE CONTROL MAGIC REMOTE CONTROL If the battery low message appears while using the Laser Display, replace the batteries. As shown in the figure, press the top of the battery cover and slide it down the cover. Insert two new and identical alkaline batteries (1.5V, AA type) with + and - poles pointing in the correct direction in the remote control.

  • Page 27: Pairing The Magic Remote Control

    MAGIC REMOTE CONTROL Pairing the Magic Remote Control You must pair the Magic remote control with the Laser Display to use it. Pair the Magic remote control prior to use as follows: Turn on the Laser Display and press the Wheel (OK) button towards the Laser Display.

  • Page 28: Setting Up The Laser Display

    SETTING UP THE LASER DISPLAY SETTING UP THE LASER DISPLAY Setting Up the Laser Display Initial Setup Connect the power cord correctly. After waiting for a moment, press the POWER button on the remote control or the control panel. When you turn on the Laser Display for the first time, a setting screen appears as shown below.
  • Page 29 SETTING UP THE LASER DISPLAY...

  • Page 30: Watching Laser Display

    SETTING UP THE LASER DISPLAY Watching Laser Display When in Standby mode, press the POWER button to turn the Laser Display on. Press the INPUT button and select the input signal you want. Control the Laser Display using the following buttons while watching the screen.

  • Page 31: Additional Options

    SETTING UP THE LASER DISPLAY Additional Options - 4:3: Resizes images to the aspect ratio. Adjusting the Aspect Ratio You can adjust the aspect ratio of the picture by pressing RATIO while - Zoom: Enlarges an image to fit the watching Laser Display.

  • Page 32: Using The Edge Adj Function

    SETTING UP THE LASER DISPLAY Using the Edge Adj Function Using the Input List To prevent the screen image from Using the Input List becoming trapezoidal, Edge Adj adjusts the top and bottom width of the image if Press the INPUT button to display the Laser Display is not set up at a right the input selection screen.

  • Page 33: To Use Simplink

    SETTING UP THE LASER DISPLAY To use SIMPLINK NOTE SIMPLINK allows users to control and • This function works only on manage multiple multimedia devices devices with the SIMPLINK logo using the convenient Laser Display remote control and SIMPLINK menu. •...

  • Page 34: Explanation On Simplink Features

    SETTING UP THE LASER DISPLAY Explanation on Using the Quick Menu SIMPLINK features You can customize frequently used menus. Menu Description Press Q.MENU to access the quick Direct Play Play the multimedia menus. device on the Laser Press the button to select a Display instantly without menu and press OK.

  • Page 35: Network Features

    NETWORK FEATURES NETWORK FEATURES NETWORK Settings Expert Settings for Network Connection To use the smart functions, the wired or It is used in a specific environment such wireless Internet must be connected. as office (where fixed IP, etc. is used). Once the Internet is connected, you can use DLNA functions, etc.

  • Page 36: Wireless Network Connection

    NETWORK FEATURES Wireless Network Connection You can use a wireless network by using the built-in wireless network module as shown below. A wireless router must be installed and operating at this time. Refer to the wireless router's user manual to see how to install it. The network settings and connection may be different depending on the network environment.

  • Page 37: Tips For Network Setup

    It will be manufacturer whether the router working normally. supports wireless connection. • LG Electronics is not responsible for • To connect to a wireless router, verify any Internet connection problems, or the SSID and security settings of any failure, error or malfunction due the wireless router.

  • Page 38: Using The Wi-Fi Screen Share Function

    Set Wi-Fi Screen Share to On. (If you don't want to use this function, program ( set to Off.) The nearby LG Laser Displays Enable Wi-Fi Direct on the device supporting WiDi are searched. In that you want to connect to.

  • Page 39: Smartshare

    SmartShare™ SmartShare™ Removing a USB Device Press Q.MENU to access the quick menus. Before Using Use the button to move to USB Device and press the OK Connecting a USB Device button. Connect a USB device (external HDD, Remove the USB device. USB memory) to the USB port of Laser NOTE Display to enjoy the content files stored...
  • Page 40 SmartShare™ Tips for Using a USB Device Supported Files for SmartShare™ • A USB device which has a built-in • Maximum data transmission rate: automatic recognition program or 20 Mbps (Megabit per second) uses its own driver might not be •...

  • Page 41: Connecting Dlna

    SmartShare™ Connecting DLNA Connecting DLNA DMR (Digital Media Renderer) Digital Living Network Alliance (DLNA) allows you to enjoy videos, music and With the Windows 7 or Window 8 PC photos saved on your PC or server operating system or DLNA-certified using the Laser Display through a home device (e.g.
  • Page 42 SmartShare™ Connecting DLNA DMP (Digital When DLNA is Malfunctioning Media Player) • Check your network settings when the DLNA option does not work With a PC having SmartShare PC properly. Software, music/video/photo files may • To watch the 1080p video through be replayed on the Laser Display by DLNA, a router that uses 5 GHz linking them via home networking.

  • Page 43: Using Smartshare

    SmartShare™ Using SmartShare™ Press the USB button on the remote control. You can watch the photo, music and video on the Laser Display by connecting a USB or home network (DLNA). It shows all the photos, music and videos in the device connected to the Laser Display.

  • Page 44: Watching The Videos

    SmartShare™ Watching the Videos In the Movie List, you can watch movies stored on the connected USB device. Tips for Playing Videos • Some subtitles created by a user may not work. • A video file and its subtitle file must be located in the same folder.
  • Page 45 SmartShare™ Video Codec Maximum supported resolution: 1920 x 1080 @ 30p Extension Codec Video VC-1 Advanced Profile, VC-1 Simple and Main Profile .asf .wmv Audio WMA Standard, WMA 9 Professional DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC, Video Motion Jpeg .divx .avi MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Audio...

  • Page 46: Item Description

    SmartShare™ Controlling the Video Playback You can control playback using the following buttons. Option List Item Description Shows the current playing position. You can use the button to move forward or backward. Stops playing and returns to Movie List. Resumes normal playback. Pauses the media player.

  • Page 47: Viewing The Photos

    SmartShare™ Viewing the Photos You can view photos stored on a connected device. Photo File File Format Item Information SOF0: baseline Supported SOF1: Extend Sequential format SOF2: Progressive Min. 64 x 64 (jpeg, jpg, jpe) Size Max. Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H) Controlling the Photo Playback You can control playback using the following buttons.

  • Page 48: Listening To Music

    SmartShare™ Listening to Music You can play audio files stored on the connected device. Audio File File Format Item Information Bit rate 32 Kbps - 320 Kbps Sample freq. 16 kHz - 48 kHz Support MPEG1, MPEG2, Layer2, Layer3 Controlling Music Playback You can control playback using the following buttons.

  • Page 49: Using The Magical Mirroring Function

    (PC) to the Laser Display. To use this function, MirrorOp Sender, an application for PC, should be installed in the user's laptop (PC). You can download this PC program from www.mirrorop.com/products_support/LG/. (To obtain a full-featured MirrorOp Sender program, a user should purchase one.) System Requirements Dual core 1.8 GHz or higher (excluding Atom processor)
  • Page 50 SmartShare™ After running Magical Mirroring, execute the MirrorOp Sender program in the PC on a standby screen as follows. In the Remote Device IP field of the MirrorOp Sender, enter the IP which is the same as the host IP of the Magical Mirroring and press Connect. <PC Screen>...
  • Page 51 SmartShare™ If MirrorOp Sender is connected normally, the connected PCs are displayed in Device List of Magical Mirroring as shown below. (All connected PCs are displayed.) If MirrorOp Sender does not run, Device List of Magical Mirroring is shown as follows.

  • Page 52: Mirrorop Sender

    SmartShare™ MirrorOp Sender Changing MirrorOp Mode Move the button to this position to change the transfer mode to application mode. Move the button to this position to change the transfer mode to movie mode. Mode Description Application Mode When MirrorOp is set to this mode, the software will transfer images with greater quality.
  • Page 53 SmartShare™ Configuring MirrorOp - Search Host • Searches the devices available for connection on the local network. - Projection Quality • Changes the quality of the projected image. If the network speed is high, select 'Best'; if not, select 'Normal'. - Remote Cursor Size •...
  • Page 54 SmartShare™ - TV Offset Compensation • Adjusts the size of screen projected to the Laser Display. Adjust the horizontal and vertical offset, and click the Apply button. - Auto Power Management • Choose this option when you run the MirrorOp application on your laptop. This option enables your Wi-Fi network to always work at an optimum level.

  • Page 55: Customizing Settings

    CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS SETTINGS Press the SETTINGS button. button to select a desired item and press the OK button. Use the Use the button to set the desired item and press the OK button. Press the EXIT button when completed. Menu Description PICTURE...

  • Page 56: Picture Settings

    CUSTOMIZING SETTINGS PICTURE Settings Press the SETTINGS button. P ICTURE Use the button to select PICTURE and ︿ • ꕊ Energy Saving : Medium press the OK button. • Picture Mode : Vivid • Contrast 100 Use the button to set up the • Brightness • Sharpness 25 desired item and press the OK button.
  • Page 57 CUSTOMIZING SETTINGS Item Description Picture Restores each mode's options to the factory default. Reset Aspect Resizes the picture. Ratio Picture By following the instructions, you can easily adjust the picture quality Wizard II to technical standards using the remote control without needing an expensive pattern device or a picture quality expert.
  • Page 58 CUSTOMIZING SETTINGS Expert Control Item Description Dynamic Adjusts the contrast to keep it at the best level for the brightness of Contrast the screen. Super Improves blurry and unclear parts in the picture to make the picture Resolution more vivid. Color Gamut Selects the range of colors to display.
  • Page 59 CUSTOMIZING SETTINGS Picture Option Item Description Noise Removes noises in the picture. Reduction MPEG Noise Reduces the noise produced while creating digital video signals. Reduction Black Level Compensates the brightness and contrast of a screen to balance with the black level of the video input. Real Cinema Provides optimal picture quality for watching a movie.

  • Page 60: Sound Settings

    CUSTOMIZING SETTINGS SOUND Settings Press the SETTINGS button. SOUND Use the button to select SOUND and press the OK button. • Sound Mode : Standard • User EQ Use the button to set up the • Volume Mode • Virtual Surround : Off desired item and press the OK button. • Clear Voice II : Off ꕅ 2 - To return to the previous menu, press the • AV Sync. : Off...
  • Page 61 SIMPLINK, setting the Laser display Speaker to Off will turn the home theatre equipment on automatically. Digital Sound Sets up Digital Sound Output. LG Sound Sync Provide the optimized sound with LG audio device (Optical) and optical cable.

  • Page 62: Time Settings

    CUSTOMIZING SETTINGS TIME Settings Press the SETTINGS button. TIME Use the button to select TIME and • Sleep Timer : Off press the OK button. • Auto Off : 60 min. • Automatic Standby : 4 hours Use the button to set up the desired item and press the OK button. - To return to the previous menu, press the button.

  • Page 63: Option Settings

    CUSTOMIZING SETTINGS OPTION Settings Press the SETTINGS button. OPTION Use the button to select OPTION and ︿ press the OK button. • Language • Caption : Off Use the button to set up the • Pointer • Set ID desired item and press the OK button. • PJT Mode : Front - To return to the previous menu, press the...
  • Page 64 CUSTOMIZING SETTINGS Item Description High Altitude If the Laser Display is used at an altitude higher than 1200 meters, turn this option on. When High Altitude is not enabled, the Laser Display may overheat or its protection function may be activated. If this happens, turn the Laser Display off and then on again after waiting for several minutes.
  • Page 65 CUSTOMIZING SETTINGS Item Description Eye Care Change the eye care sensor settings. Sensor NOTE • If a user gets closer to the product while the eye care sensor is turned on, the sensor detects it and reduces the light intensity automatically to protect the user's eyes.

  • Page 66: Network Settings

    CUSTOMIZING SETTINGS Item Description Eye Care Item Sensor Sensor Turn the eye care sensor on/off. Sensitivity Set the sensitivity of the eye care sensor. The default is medium, but set it higher for better sensitivity or lower for less sensitivity. Balloon Help Enables/disables the balloon help.
  • Page 67 CUSTOMIZING SETTINGS Item Description Smart Share Changes the settings for SmartShare. Setting Item Laser Changes the name that appears when searching for Display the Laser Display from other devices. Name Share Allows / prevents connection to the Laser Display from My Laser other devices.

  • Page 68: Connecting External Devices

    CONNECTING EXTERNAL DEVICES CONNECTING EXTERNAL DEVICES You can connect various external devices to Laser Display. Computer/Laptop Video Digital Device HDMI - Page 69 Component - Page 72 Input(AV) - Page 72 RGB - Page 70 USB Devices - Page 39 Game Console Headphones - Page 73 Headphones...

  • Page 69: Connecting An Hd Receiver, Dvd Player, Or Vcr

    CONNECTING EXTERNAL DEVICES Connecting an HD Receiver, DVD Player, or VCR HDMI connection Connect an HD receiver, DVD, or VCR player to Laser Display and select an With an HDMI cable, you can enjoy high appropriate input mode. quality picture and sound. Connect the HDMI input port of Laser Display to the NOTE HDMI output port.

  • Page 70: Hdmi To Dvi Connection

    CONNECTING EXTERNAL DEVICES Connecting a PC HDMI to DVI Connection Use the HDMI to DVI cable to connect This Laser Display supports the Plug & the HDMI input port of the Laser Display Play function. Your PC will automatically to the DVI output port. detect the Laser Display and requires no Press the INPUT button on the remote driver installation.

  • Page 71: Hdmi To Dvi Connection

    CONNECTING EXTERNAL DEVICES HDMI to DVI Connection RGB to DVI Connection Use the HDMI to DVI cable to connect Connect the Laser Display's video (PC) the HDMI input port of the Laser Display input port to the DVI output port. to the DVI output port.

  • Page 72: Connecting External Devices

    CONNECTING EXTERNAL DEVICES Connecting External Component Devices Connection You can enjoy more vivid images when AV Connection you connect an external device with a component port to the component input Connect the output ports of an external port of the Laser Display. Press the device and the AV input ports of the INPUT button on the remote control to Laser Display using AV connection...

  • Page 73: Connecting Headphones

    CONNECTING EXTERNAL DEVICES Connecting Connecting a Laptop Headphones You can connect the Laser Display to a laptop to use various functions. Headphone Connection RGB Connection You can listen to the sound from Laser You can connect it to the video (PC) Display using headphones.

  • Page 74: Hdmi Connection

    CONNECTING EXTERNAL DEVICES HDMI connection The table below shows examples of switching the output. For more Connect the HDMI input port of Laser information, refer to the "External Display to the HDMI output port. Output", "Connecting to an External Monitor", or similar sections of the owner's manual of your computer.

  • Page 75: Using The Trigger Port

    CONNECTING EXTERNAL DEVICES Using the TRIGGER Port Motor screen connection Connect an external device (e.g., roll screen) to the TRIGGER (12V) port using a mini jack cable (3.5 mm). Ready 3(PC) 1(ARC) HDMI TRIGGER (12V) Ready 3(PC) 1(ARC) HDMI TRIGGER (12V) NOTE •...

  • Page 76: Serial Communication Function

    SERIAL COMMUNICATION FUNCTION SERIAL COMMUNICATION FUNCTION Using Serial Communication If the Laser Display is connected to a PC through an RS-232C cable, you can use the PC to control functions of the Laser Display such as power On/Off or input selection, etc.

  • Page 77: Communication Protocol

    SERIAL COMMUNICATION FUNCTION 2. OK Acknowledgement Communication Parameter Setup Baud Rate: 9600 bps(UART) [Command2] [ ] [Set ID] [ ] [OK] [Data] [x] Data Length: 8 bit * The set transmits ACK (acknowledgement) based Parity: none on this format when receiving normal data. At this Stop bit: 1 bit time, if the data is data read mode, it indicates Flow Control: none...
  • Page 78 SERIAL COMMUNICATION FUNCTION Command Reference List Command 1 Command 2 Data (Hexadecimal) 01. POWER 00 - 01 02. Aspect Ratio 03. Blank Image 00 - 01 04. Contrast 00 - 64 05. Brightness 00 - 64 06. Color 00 - 64 07.
  • Page 79 SERIAL COMMUNICATION FUNCTION 01. Power (Command: ka) 02. Aspect Ratio (Command: kc) ⇒ Powers the set on/off. ⇒ Adjusts the aspect ratio. Transmission Transmission [k][a][][Set ID][][Data][Cr] [k][c][][Set ID][][Data][Cr] Data 00: Power Off Data 01: 4:3 01: Power On 02: 16:9 04: Zoom 06: Set By Program 09: Just scan...
  • Page 80 SERIAL COMMUNICATION FUNCTION 04. Contrast (Command: kg) 06. Color (Command: ki) ⇒ Adjusts the screen contrast. ⇒ Adjusts the screen color. Transmission Transmission [k][g][][Set ID][][Data][Cr] [k][i][][Set ID][][Data][Cr] Data Min: 0H - Max: 64H Data Min: 0H - Max: 64H (* Transmitted in hexadecimal code) (* Transmitted in hexadecimal code) * See the data structure.

  • Page 81: Color Temperature

    SERIAL COMMUNICATION FUNCTION 08. Sharpness (Command: kk) 10. Key Lock (Command: km) ⇒ Adjusts screen sharpness. ⇒ To Set the function of locking the remote control and front panel control on the Laser Transmission Display. Transmission [k][k][][Set ID][][Data][Cr] [k][m][][Set ID][][Data][Cr] Data Min: 0H - Max: 32H (* Transmitted in hexadecimal code)
  • Page 82 SERIAL COMMUNICATION FUNCTION 12. Black Level (Command: nm) 14. Auto Configure (Command: ju) ⇒ Adjusts the value of black level. ⇒ Optimizes the screen automatically in PC input mode. Transmission Transmission [n][m][][Set ID][][Data][Cr] [j][u][][Set ID][][Data][Cr] Data 00: Low 01: High Data 01: To set (* Transmitted in hexadecimal code)
  • Page 83 SERIAL COMMUNICATION FUNCTION 16. Key (Command: mc) 18. Mute (Command: ke) ⇒ Enables/disables the mute function. ⇒ Sends a key code of the IR remote control. Transmission Transmission [k][e][][Set ID][][Data][Cr] [m][c][][Set ID][][Data][Cr] Data 00: Mute On (volume off) Data Key Code See Page 84 01: Mute Off (volume on) (* Transmitted in hexadecimal code) [e][] [Set ID][][OK][Data][x]...
  • Page 84 SERIAL COMMUNICATION FUNCTION <Key Code> Key Name Key Code Key Name Key Code ∧ 0x40 0x7C ∨ 0x41 MUTE 0x09 PAGE ∧ > 0x06 0x00 PAGE ∨ < 0x07 0x01 POWER 0x08 STILL 0xBC INPUT 0x0B EXIT 0x5B SETTINGS 0x43 0x10 (BACK) 0x28...

  • Page 85: Maintenance

    MAINTENANCE MAINTENANCE Clean your Laser Display to keep it in optimal condition. Cleaning Cleaning Cover Glass To remove dust or stains on the cover glass, use an air spray or use a swab or soft cloth to wipe the glass gently. Cleaning the Laser Display Case To clean the case of Laser Display, first...

  • Page 86: Updating The Software

    MAINTENANCE Updating the Software When a software update is required, run the software update to obtain the latest software version. You can manually check for and download any software updates. Press the SETTINGS button. Select SUPPORT and go to Software Update. Item Description Software Update...

  • Page 87: Specifications

    SPECIFICATIONS SPECIFICATIONS MODELS HECTO (HECTO-GL) Resolution (Pixel) 1920 (Horizontal) × 1080 (Vertical) Aspect ratio 16:9 (Horizontal:Vertical) Panel size (mm) 14.515 (Horizontal), 8.1648 (Vertical) Projection distance 0.53 m (2.54 m) (Video size) Ratio of upward 123 % projection POWER AC 100 - 240 V, 50/60 Hz...
  • Page 88 SPECIFICATIONS Supported Monitor Display Supported HDMI/DVI-DTV Mode Horizontal Vertical Horizontal Vertical Resolution Frequency Frequency Resolution Frequency Frequency (kHz) (Hz) (kHz) (Hz) 31.5 720 x 400 31.469 70.08 480p 31.469 59.94 640 x 480 31.469 59.94 576p 31.25 800 x 600 37.879 60.31 37.5...
  • Page 89 1080p disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
  • Page 90 The model and serial number of the Laser Display are located on the back or on the side of the Laser Display. Record them below should you ever need service. MODEL SERIAL...

Table of Contents