Door Shell Installation
1. Remove the door retainer shipping latch following the directions below.
Standard
Screwdriver
Rotate this shaft
1/4 turn clockwise
until the door
unlatches.
2. Place the door shell face down on a non-scratching surface. Lift the door retainer off the hinges.
Insert the retainer into the door shell following the directions below. Note how the door shell is guided
into place
© Travis Industries
Optional Equipment
Swing the door retianer open. Remove and
discard the shipping latch and nut.
Shipping Latch
Door Retainer
Door Shell
100-01279
Door Retainer
9/16" Wrench
The indent on the door retainer slides into
the clip on the door shell (on both sides).
29
4141215