Configuring The Audio Jacks; Connecting A Projector Or Monitor - Gateway 6-Bay mBTX PRO User Manual

To remove a memory card:
•

Configuring the audio jacks

If the back of your computer has five audio jacks, they are universal jacks (which use a round
mini-jack connector). The five jacks can be used for more than one purpose. For example, the
blue jack on the computer can be a stereo in jack or a stereo out jack. For more information on
how each jack can be used, see
other than the default audio device, you need to configure them.
To configure the universal audio jacks:
1
2
3
4
5

Connecting a projector or monitor

If your computer's video card supports it (it must have two video connections), you can connect
an additional monitor or projector to your computer.
the actual screens on your computer.
To use a projector or additional monitor:
1
2
3
4
5
www.gateway.com
Important
Do not use the remove hardware
memory card.
Wait for the memory card reader access indicator to stop blinking, then pull the memory
card out of the slot.
Connect your audio device(s) to the computer audio jack(s).
Click Start, then click Control Panel. The Control Panel window opens.
Click Hardware and Sounds, then click Sound. The Sound dialog box opens.
Click the Playback, then double-click the speakers.
-OR-
If your computer has the Realtek Sound Effect Manager installed, double-click the Sound
Effect Manager icon
Configure the audio jacks for your speaker setup.
Important
The dialog boxes shown in this section are examples only and may not represent
Turn off your computer.
Plug the projector or monitor cable into the secondary VGA port
Tip
For the location of the VGA port on your computer, see
Turn on your computer.
Plug the projector or monitor power cord into an AC power outlet, then turn it on. Windows
recognizes the new hardware and searches for its driver. You may need to install the driver
from the disc supplied by the manufacturer or download the driver from the
manufacturer's Web site.
After the driver is installed, right-click any empty space on the desktop, then click
Prersonalize. The Personalization menu opens.
icon in the taskbar to remove the
"Back" on page 7. To use the universal audio jacks for something
on the taskbar. The Realtek dialog box opens.
"Back" on page
on your computer.
7.
49