Gateway 6-Bay mBTX PRO User Manual page 16

Component
Voltage switch
Case cover
thumbscrew
Audio input (Line in)
jack (blue)
OR-
Side speaker jack
Center/subwoofer
jack
(orange plug)
(optional)
Cover release lever
Parallel port
PS/2 keyboard port
IEEE 1394 port
(optional)
Ethernet (network)
jack
Case cover
thumbscrew
Headphone/analog
speakers jack (green)
-OR-
Front speakers jack
Microphone jack (red
or pink)
Optical out jack
(optional)
Rear speaker jack
(black plug)
(optional)
8
CHAPTER 2: Setting Up and Getting Started
Icon Description
Before turning on your computer, make sure that this switch is in
the correct position for the correct power available. The switch is
preset at the factory with the correct voltage for your area.
In the United States, the utility power is supplied at a nominal 115
volts at 60 Hz. The power supply should always be set to this when
your computer is operating in the United States. In other areas of
the world, such as Europe, the utility power is supplied at 230 volts
at 50 Hz. If your computer is operating in an environment such as
this, the voltage switch should be moved to 230. See
voltage selection" on page
Remove this screw before opening the case.
If the back of your computer has five audio jacks, this jack is user
configurable for one of the following:
Stereo in: plug an external audio input source (such as a stereo)
into this jack so you can record sound on your computer
(Default).
Stereo out: plug your side left and right speakers into this jack.
For information on configuring this jack, see
audio jacks" on page 49
Plug your center speaker and subwoofer into this optional jack.
For information on configuring this jack, see
jacks" on page
Press toward the side of the case to open the computer cover.
Plug a parallel device (such as a printer) into this port. For more
information, see
page 19.
Plug a PS/2 mouse into this port.
Plug an IEEE 1394 (also known as Firewire
as a digital camcorder) into this 4-pin IEEE 1394 port. For more
information, see
page 19.
Plug a 10/100 Ethernet network cable or a device (such as a DSL
or cable modem for a broadband Internet connection) into this jack.
For more information, see
Remove this screw before opening the case.
If the back of your computer has five audio jacks, this jack is user
configurable for one of the following:
Headphone: plug headphones or amplified speakers into this
jack (Default).
Stereo out: plug your front left and right speakers into this jack.
For information on configuring this jack,
audio jacks" on page 49.
Plug a microphone into this jack.
Plug a digital optical cable into this jack.
Plug your rear right and left speakers into this optional jack.
For information on configuring this jack, see
jacks" on page
11.
49.
"Installing a printer, scanner, or other device" on
®
or i.Link
"Installing a printer, scanner, or other device" on
"Networking Your Computer" on page
49.
"Checking the
"Configuring the
"Configuring the audio
®
) device (such
81.
see"Configuring the
"Configuring the audio