Ems/Communication Events; Single Fault Events - Samsung RES 3.6 kWh All In One User Manual

Type
WARNING
PROTECTION

7.2.7 EMS/Communication Events

Type
WARNING
WARNING
WARNING

7.2.8 Single Fault Events

Type
WARNING
Australia (Eng.) 05/2015. Rev1.1
Code Description
E513 CELL TEMPERATURE
SENSOR 1EA
E514 CELL TEMPERATURE
SENSOR 2EA
[Table 7-7: BMS general events list]
Code Description
E601 INVERTER
COMMUNICATION
EVENT
E602 ETHERNET EVENT
E603 ENERGY METER
EVENT
[Table 7-8: EMS/communication events list]
Code Description
E701 GRID UNDER VOLTAGE
FAULT
E702 GRID OVER VOLTAGE
FAULT
E703 GRID UNDER
FREQUENCY FAULT
E704 GRID OVER FREQUENCY
FAULT
Message Description
Measures
Occurs above the standard battery
cell temperature.
Occurs above the standard battery
cell temperature.
Measures
Turn off and restart the system.
Reconnect the communication line
between the EMS board and the
DSP board.
Disconnect and reconnect the LAN.
Turn off and restart the Router.
Make sure that the DHCP server
function of Router is activated.
Turn off and restart the system.
Make sure that the Meter device is
properly selected.
Disconnect and reconnect the D0
cable.
Turn off and restart the system.
Measures
The operation mode is terminated
when a power system event occurs.
Restart 1 minute after the electric
power system event is settled.
The operation mode is terminated
when a power system event occurs.
Restart 1 minute after the electric
power system event is settled.
The operation mode is terminated
when a power system event occurs.
Restart 1 minute after the electric
power system event is settled.
The operation mode is terminated
when a power system event occurs.
Restart 1 minute after the electric
47