Table of Contents
Advertisement
3. Product Overview
The All In One system includes the PV inverter, battery charger/discharger, Li-Ion battery,
and EMS. When compared to previously released products, it is much simpler to install, thus
making it an optimized solution for increasing self-consumption rate at a low cost.
The basic operating modes consist of PV generation mode, PV generation +
charge/discharge mode. The operation mode of this product is automatically determined by
the EMS algorithm.
-
1
Li-Ion battery
2
INVERTER (PV inverter and battery charger / discharger)
3
Tray BMS
4
Input / Output terminal (MC4-2set and Grid connection terminal -L/N/PE)
5
Cooling Fan
6
Communication terminal block
7
Carrying handle
Australia (Eng.) 05/2015. Rev1.1
[Figure 3-1: Part View of Samsung All in One]
[Table 3-1: Part Description]
Description
Product Overview
15
Advertisement
Table of Contents
