Operating Modes
4. Operating Modes
As shown in the [Figure 4-1], the status of this system is displayed in real-time on the
indication screen (LCD screen). This status indication screen extends to 4-digit numbers. The
icons are defined for each state and the details are described in the ensuing subsections.
4.1 Descriptions of Operation Mode
This system is composed of six modes: PV Auto, PV Only, Battery discharge, Standby,
Maintenance (forced charge), and Stand-alone. The event check status should not be
considered as any specific mode.
4.1.1 PV-Auto Mode
Both solar energy generation and battery charge-discharge are available.
1.
The solar-generated power is charged or discharged to the battery based on the EMS
2.
decision.
A maximum of 4.6kW or less can be sent to the LOAD and the electric power system.
3.
16
[Figure 4-1: Front status indication screen]
Australia (Eng.) 05/2015. Rev1.1