Table of Contents
Advertisement
Maintenance for Problem Solving
6. Maintenance for Problem Solving
6.1 Fan Exchange
Change the fan according to the following procedures.
Turn off the AC circuit breaker and the DC disconnect switch.
1.
Remove the side cover. Make sure not to remove the front case cover.
2.
Remove the fan connector.
3.
Separate the fan.
4.
34
Do not disassemble the parts in operation for cleaning purposes. High
voltage can cause lethal damage to the human body.
Please make sure that the AC and DC switch relay in the distribution box is
disconnected before disassembling the system.
[Figure 6-1: Side cover removal]
[Figure 6-2: Fan removal]
WARNING
Australia (Eng.) 05/2015. Rev1.1
Advertisement
Table of Contents
