Roland VersaCamm VS-640 Setup Manual page 40

5. Installing the Ink Cartridges

w
When the screen shown in the left is displayed, repeat Procedure
If you don't open it within a specified time, operate according to the instruction on the
screen.
x
If you do not follow the correct procedures, the message below will be displayed on
the screen.
When this screen appears, make sure the drain bottle is not overflowing with discharged fluid, and
then press
38
When the screen shown in the left is displayed, turn the
hexagonal wrench to the direction of the arrow shown in the
figure below.
The valve opens.
When the screen shown in the left is displayed, the cleaning operation is
still continued inside the machine. Open the valve immediately. Never leave
the machine with the valve closed. It may damage the print heads.
Wait for the next instruction.
Make sure the drain bottle is not overflowing with discharged
fluid, and then press
When this screen appears, the ink-filling process is finished.
to proceed with your work following the on-screen instructions.
Hexagonal
Wrench

and
.

.