Roland VersaCamm VS-640 Setup Manual page 38

5. Installing the Ink Cartridges
}
Continuously, clean the print heads in the order of the slots 3 and 4, the slots 5 and 6,
and then the slots 7 and 8 as following the on-screen instructions.
Insert and remove the SOL INK cleaning cartridge and dummy cartridge from and into the slot with the
slot number indicated on the screen. If the slot number is incorrect, filling with ink will fail.
3.
Insert the ink cartridges of the respective colors.


w
x
36
Insert the ink cartridges into the slots 7 and 8.
Label
surface
Insert the dummy cartridges to the slots 1 to 6.
With the same procedure of
Press
Pull out the dummy cartridges from the slots 1 to 6.
Press
When having difficulty pulling out the dummy cartridges, insert the re-
tainer used in the procedure
For instructions for use of the retainer, see the procedure
pulling out only the retainer, you can remove it easily by tilting it slightly
forward.)
Gently shake the ink cartridges of the re-
spective colors before inserting them to
the slots.
Insert into the slot of the
matching color.
2.- y
, insert the dummy cartridges.
.
.
2.- y
into the slots to make the task easier.
2.- y
(When