Roland VersaCamm VS-640 Setup Manual page 35

2.
Clean the heads using the cleaning cartridges.

In the case of 4 colors of CMYK (CMYK mode)
In the case of 6 colors of CMYKLcLm (CMYKLcLm mode)
In the case of 7 colors of CMYKLcLmW (W mode)
In the case of 8 colors of CMYKLcLmWMT (WMT mode)

w
x
Insert and remove the cartridges of which slot numbers are flashing.
The above sample message shows you should remove the SOL INK cleaning cartridges from the
slots 1 and 2.
When the relevant cartridges are removed correctly, the flashing numbers are cleared.
Use
Press
Check the ink type and use
Press
Make sure the drain bottle is installed.
Press
Insert cleaning cartridges into slots 1 and 2.
Insert the cartridge straight down from the top, as far as it will go.
Flashing
to select the ink type.
.
.
.
Label
surface
5. Installing the Ink Cartridges
to select [Yes].
Cleared
33