z
{
|
Pull out the SOL INK cleaning cartridges from the slots 1
and 2.
Insert the cleaning cartridges into the slots 1 and 2.
Insert the cartridge straight down from the top, as far as it will go.
Following the on-screen instructions, repeat the process above
one more time.
Label
surface
Pull out the cleaning cartridges from the slots 1 and 2.
Label
surface
Pull out the dummy cartridges from the slots 3 and 4.
Press
.
Round hole
When having difficulty pulling out the dummy cartridges, insert the re-
tainer used in the procedure
For instructions for use of the retainer, see the procedure
pulling out only the retainer, you can remove it easily by tilting it slightly
forward.)
5. Installing the Ink Cartridges
2.- y
into the slots to make the task easier.
2.- y
(When
35