Software And Reset Tab - NETGEAR Fuse User Manual

Software and Reset Tab

From this tab, you can save your current device settings and restore them later, update your
software, reset your device to default settings, and set your device startup options.
In the Mobile Hotspot Manager, click Settings > General > Software and Reset.
n
You can:
Back up and restore your hotspot's configuration, if needed. See Export Settings and Import
n
Settings.
Update your device's software. See Update the Mobile Hotspot Software and Firmware.
n
Reset some or all of your device's settings. See
n
Configure the hotspot to install tethering drivers (if needed) when device is connected via USB to
n
a Windows or Mac system. See TRU-Install.
The following information is displayed.
Item
Download / Click Save to make a copy (export) of the hotspot's current configuration, so
Backup that you can restore it later if needed. See Export Settings.
Settings
Restore Click Choose file to use a previously saved copy of your device
Settings configuration. See Import Settings.
Software Click Check for update to see if a new version of your device's software has
Update been released, and and if there is, download and install it. The last time you
checked is shown on the screen (Last checked
Hotspot Software and Firmware.
Note: Software downloads count against your plan's data limit.
Settings
R eset Your Device.
Description
at). See Update the Mobile
42